Edit measurement position

Production > Quality control > Quality control orders > Edit QC orders > Input per sample > Measurement samples > Edit measurement position 

 Top  Previous  Next
Expand/Collapse Toggles

In this window a measurement position can be subsequently changed, deleted or inserted new.  Authorizations for Edit QC order is required.

For field descriptions see QC-inspection plan - Edit measurement position.

 

PATH: Production > Quality Control > QC Orders > Open an entry > Input by Sample button > Double-click a sample > Edit a position.

QC_by_Sample_edit_Meas_pos_2022.09

Window qs_qsftpos_edit_detail.psr

 

Field Descriptions

Field

Meaning

Position

The list is sorted by this number. You can re-sort using Drag&Drop. Alphanumeric characters are allowed, position numbers can be assigned twice.

Batch/Serial

Batch/Serial number

QC-Order

Short description for the measurement position. Right-click to select a default from the default texts. After selection, the method description is also transferred.

see Manage default texts.

Methodology

Long description. Edit by double-clicking or clicking the "Description" button.

Type of input

Available types:

 

Measurement

Minimum / Maximum values are considered. The "measurement" tab is displayed. The measured value is OK if it is between the minimum and maximum.

Attribute

A measuring position can be marked as "OK"

Values can be entered, but will not be checked.

Example:
Check of color
Enter "red" and "OK" for confirmation.

Text

Position is only displayed. No confirmation or entry.

 

Attribute: you can only specify whether it is okay, and include information.
Measurement: Minimum / maximum values are considered.
Text:  Only a header line.

Desired value,
UoM

Specify target value and unit of measure (mm, kg, % etc., UoM is mandatory)

Minimum / Maximum

The measurement position is released when the measured value lies within this range.

 

Only possible for entry type "measurement" not for "attribute" or "text".

 

If no value is entered, "allowed to set OK manually" will be activated automatically at checking.

Relevant

This option must be activated if this measuring point is relevant for the release of the test plan.
This option is always deactivated for type "Text".

Note: For automated release at least one relevant position is required.

Print

This option must be activated if the measuring position should be printed in a quality control protocol.

Test tool

A test tool can be selected. Only information – no effect. No reservations or dispatches.

see Tool administration

Condition

Only inserted if the stored value matches the selected values in query. see conditional testing positions

Item rule

Measurement position is only inserted if this field is empty or matches the value entered in Item QC-link.

 

The measurement position can be hidden or displayed depending on the item or document. See Item QC-link - Measurement position - Rule.

Manual OK

 

If the option is active, the icon "OK" is displayed in the Measurement sample . There, it is possible to set the position to "OK" even if the measured value is out of allowed range.

 

For type of entry "Attribute" this option is always active.

 

Entering values, this option is automatically enabled if no minimum or maximum value was defined.

Additional release Deactivate

By default, each measurement position needs to be checked and released by a second person. Four-eye principle

 

Important: The person who entering the measured values is not allowed to release them, as well.

 

If this option is disabled, the measurement position is automatically released, after the field "OK" was set.

 

Electronic signature is not supported at this level.

 

Right window section:

Field

Description

Picture

Define an image to appear in the list view of the browse window.

Color

Define a color with the help of sliders for the position to be displayed in the list view of the browse window.

Test tool

Select a Test tool from the dropdown menu. See Tool Administration.

Group

Select a Quality Control group from the dropdown menu.

Unit

Unit of measure

Attribute Selection

Add any attributes

Sorting

Sorting number

Position

Position number

 

Functions:
Add: Create new measurement position.
Remove: Delete current measurement position.

 

See

Quality control orders

 Quality control order - Item master - Quality control - QC-inspection plan

         Register per sample

                 Register measurement position

                         Edit measurement position

         Register per test

                 Register measured values for all samples

         Documents

         Transfer

Help URL: https://help.beascloud.com/beas202402/index.html?qs_ftpos_edit_detail.htm