Field

Meaning

Inspection Plan

Any ID for the inspection plan. An item number can also be stored. If no inspection plan is stored in the item and there is an inspection plan with the same ID, that inspection plan is used.

Measuring all

Samples are inserted for each inspection plan.
Here, you can indicate that a sample should be inserted every n number of test items (units) to be tested.
 
For 0, only one sample is inserted.
For example, if quantity is 1, and this value is 10, one sample is inserted. If the quantity is 10, one sample is inserted, and two samples if the quantity is 11, 15 or 20.
 
Alternatively, a quantity-dependent number of samples can be stored in a table. To do this, click the orange arrow left to the input field.
The number can now be entered depending on the quantity.
There are two options here (type)

"Fixed": The number of samples specified here above quantity x
"Per": One sample every "per quantity" x above quantity x

NOTE:

If a QC plan is stored with a position, the "Measure all" option is ignored. Only one sample is ever created, and further samples can be created as needed.

Information

Any text information

Field

Meaning

Question

Task of measurement

or Column

a beas-field can be chosen, from which values for testing are taken

Allowed values

define allowed values for the fields named above

Field

Meaning

Position

The list is sorted by this number. You can re-sort using Drag&Drop.

QC test

Short description for the measurement position. Right-click to select a default from the default texts. Acceptation of the method description after the selection.

See: Manage default texts

Methodology

Long description. Edit by double-clicking or clicking the "Description" button

Type of Input

The following types are available:

attribute, measurement, text
Attribute: you can only specify whether it is okay, and include information
Measurement: Minimum / maximum values are considered
Text:     only a header line

Target value,
Unit

Specify target value
(Only information) and the unit (mm, kg, % etc.)

Minimal

The minimum and maximum value is specified for a measuring point. The measuring position is released when the measured value lies within this range. If only OK Yes/No is expected, then 0 can be entered for minimum and 1 for maximum. The user enters 0 for "faulty" and 1 for "OK" in the measuring log.

Maximum

See minimum

Relevant

This option must be activated if this measuring point is relevant for the release of the test plan.
This option is always deactivated for type "Text".

Print

This option must be activated if the measuring position should be printed in a quality control protocol.

Test tool

A test tool can be selected here. This is for information purposes only and has no further effect. The test tool will not be reserved. The test tool is not reserved and is not burdened in any way.

See: Tool administration

Condition

Is only inserted if the stored value matches with the value selected at the query. See Conditional testing position

Field

Meaning

OK

Save entries and close the screen

Cancel

Cancel and close the screen

New

Create a new inspection plan

Delete

Delete the selected inspection plan

Match

Missing measurement positions of the samples are matched with all QC orders and inserted. Please regard system messages!