Backflush is only available as POST command

With this you can create the issue and receipt information for one work order in one time

Related to configuration wizard -> Production -> Work order Backlfushing Process -> Enter time automatically   the system will create the time receipt message for all routing positions automatically

 

POST BackFlush
{
"DocEntry":6002133, // Work oder number
"LineNumber":10,  // Line Number 
"DocDate":"2020/10/10", // Optional Document date, if not today. 
"CloseEntry":true, // set to true, if you want to close the work order
"QuantityGood":1, // Good Quantity in Warehouse Unit
"IssueLines":[{"LineNumber2":10,"Quantity":1,"ItemCode":"RM","WhsCode":"01"}], // Issue information
"ReceiptLines": [ {"ItemCode": "FP", "Quantity":1.000000, "WhsCode": "01"}] // receipt information
}

 

This document create

- Issue document

- Time Receipts entries (related to configuration wizard settings)

- Receipt document

Return created Receipt document

 

If the assembly is not stock related, the system return only ok without created document.

You can read all needed Bill of Material positions with "PreAssign" function

 

If you wan to send more information for created receipt / issue documents, example remark or own udf, you can send the complete issue/receipt document incl. Header

 

{
"DocEntry":6002133, // Work oder number
"LineNumber":10,  // Line Number 
"DocDate":"2020/10/10", // Optional Document date, if not today. 
"CloseEntry":true, // set to true, if you want to close the work order
"QuantityGood":1, // Good Quantity in Warehouse Unit
"Issue": // All Issue information. See Issue document
   {"DocumentLines":[{"LineNumber2":10,"Quantity":1,"ItemCode":"RM","WhsCode":"01"}]},
"Receipt": // All receipt information. See Receipt document. Assembly self must be on last position.
   {"Remarks":"MyInfo","U_MyUDF":"abc", // use ths format to define additional properties on header level
    "DocumentLines": [  {"ItemCode": "FP", "Quantity":1.000000, "WhsCode": "01"}] }
}

 

 

 

Note:

You can use this function always. It's not checking the parameter

configuration wizard -> Production -> Material Posting -> Automatic Material posting