(>>) MiddleCalcRoutingPositionForward
Contents
Executed during the capacity calculation of every routing position after the calculation of transfer time, at the beginning of a routing position and before the calculation of transfer time.
Only Forward calculation
You can change the start time for work time, but you can move only forward, because transfer time is calculated.
Variable |
Read |
Write |
Description |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
e_Method |
x |
Calculation Method MRP Executed by MRP, ATP, CTP Workorder Executed manually from work order Or the Calculation Method, which defined in APS List |
|||||||||||||
e_MethodStep |
x |
In the Method you can define more than one step. This is the step. First step is 1 |
|||||||||||||
e_DocEntry |
x |
Work order document number |
|||||||||||||
e_LineNumber |
x |
Work order position number |
|||||||||||||
e_LineNumber2 |
x |
Routing Position |
|||||||||||||
e_BaseDocEntry |
x |
Base document, example Sales order. Only in MRP |
|||||||||||||
e_BaseLineNumber |
x |
Base document line |
|||||||||||||
e_ItemCode |
x |
Calculated Item Code |
|||||||||||||
e_Quantity |
x |
Calculated Quantity |
|||||||||||||
e_CheckReservedTime |
x |
Check reserved times |
|||||||||||||
e_RoutingSplitt |
x |
Allow Routing Split true/false |
|||||||||||||
e_Simulation |
x |
Simulation true/false |
|||||||||||||
e_CalcSaveType |
x |
Save type
|
|||||||||||||
e_ReservationType |
x |
||||||||||||||
e_Resource |
x |
x |
Resource ID If you change the resource, the system makes only the time reservation on this resource, but does not change the resource on the routing position. |
||||||||||||
e_TimeLine |
x |
x |
Time line in format yyyy/mm/dd hh:mm Backward: The End Date Forward: The Start Date
Note: The time line is between transit and idle time. In forward calculation you can go only forward in time line In backward calculation you can go only backwards.
|
||||||||||||
e_Duration |
x |
x |
Duration in minutes |
Every Date must have the following format: yyyy/mm/dd hh:mm
If you use another format, the system will not save the value correctly.
NOTE:
The system does not check the changes. If you change any parameter, you must check all / calculate other parameters too.
The system saves the changes in the Work order routing position, but this does not affect time reservation table BEAS_RESOURCEN!