puts a command on the POST-Event-stack.

 

The command gets executed afterwards, i.E. outside of  ITEMCHANGED.

 

how it works:

An internal TIMER checks every 0.4 seconds the POST-Event-stack and processes the included functions.

 

if you have commands on the event-stack you can not make a rowfocuschange.

if you make a post-event with prior2, then you can make a rowfocuschange

 
// send command on Eventstack
// you can not make a rowfocuschange (= open window)
post=myfunction()
 
// with prior2: you can make a rowfocuschange
post=prior2:myfunction