In Resources > Master data costs can be defined which accrue during the usage of the resource. In Resources > Master data, you can define the costs incurred when using the resources.
Attention:
The information whether the costs per minute or hour are stored is not stored in the resource. So if this switch is changed, all stored costs correspond to the new setting.
Example: You have stored 1, You have stored 1,60€/Min. If you change the switcher to hour, the cost rate will be changed to 1,60€/Hour. Therefore, the cost rates will be recalculated after the change. You have deposited 1,60€/minute. If you change this switcher to hour now, you get the cost rate of 1.60€/hour. You must, therefore, make certain that the cost rates are revised after the changeover.
Attention:
As soon as a work order has been created, this setting cannot be changed and it will be hidden. Otherwise the change would affect existing work orders which would cause the evaluation to be false. As soon as a production order has been generated, the switch conversion would also affect existing production orders – the valuation would then be incorrect.
If a subsequent change is required, it has to be made as follows:
1. Finalize all running work orders.
2. Open debug window, Script tab.
For change per minute:
setsetup=arbplatz_kstje=1
For change per hour:
setsetup=arbplatz_kstje=60
Run Script – Execute
3. Adjust cost rates in resources.
Do not use existing Precalculations and do not open work orders.
|
|