Precalculation supports Production Lot size
Lot size - Precalculation
- "Calculation lot size" is the default lot size for the calculation.
- "Production lot size" is the maximum lot size and is relevant for the calculation of fix costs.
The production lot size affects:
- Setup times in a Bill of materials position.
- Fixed times (Quantity per = 0) in routing positions.
- Fixed surcharges.
- Purchase prices (special price list).
- Price per lot size
In sub-components the calculation uses the production lot size. If you activate Configuration wizard > Production > Create > Sub-assemblies: Consider production lot size, the system uses the production lot size defined in the sub-component, otherwise the lot size of the main item.
Example:
Routing position 10 Min setup time, 5 Min Mach+Labor time
Lot size calculation: 100, Production: 0 (ignore it)
Cost = 10 Min + 100* 5 Min = 510 Minutes * cost rate
Lot size calculation: 100, Production: 30
In this case we must calculate the production 30 + 30 + 30 + 10 = 4 times.
Cost = 4*10 Min + 100*5 Min = 540 Minutes * cost rate
Working with sub assemblies
If consider Sub Assemblies is activated, the system split the subassemblies too
Example: Production 40 Pcs, Lot size 30 Pcs
Sub assembly is order related, Production lot size = 0 Pcs (no lot size)
In this case we working work order position related.
If order related sub assembly has own lot size, the system check this too - but always per production level from father item
Example : Lot size 20 Pcs
In this case the setup time will be multiplicated with 4 in the sub assembly
2. Example for order related sub assembly:
-Main and Subitem are order related, the lotsize of the main item is 50
-We need the subassembly 2 times per main item, the lotsize of the Subitem is 90
-We want to produce 140 Units of the main item
Result:
-We need to produce 3 lots for Mainitem (50 + 50 + 40)
-For the first and second lot of the mainitem we need 2 lots of the subitem (90 + 10)
-For the last lot of the mainitem we need 1 lot of the subitem (80)
Stock related
if Sub assembly is stock related, then the sub assembly ignore the lot size from father assembly
if stock related sub assembly has own lot size, then the system use it without relation of lot size of father item.
Note:
This is working differently than in Beas 2020.11 or older. If you need the old functionality, you can change this in a user event. See Script documentation.
|