Scheduling

Gannt

Open the Gannt view, display all work orders, for which the column "OK"- was checked.

Resources

Open a selection window, which are considered at the Planning.

See Notes APS - Planning - Resources

Filter

Open filter settings ( priority, document number, start-/delivery date, project etc)

Mark

Multiple entries can be marked by using the multiple marking function.These selected entries can be activated / deactivated for the calculation or other collective actions via the button "Mark" (Check mark in column "OK" will / will not be set)

The selected work order is marked ( In the first column of the production list a check mark is set (OK)

Manual sorting

Active:you may sort the work order by drag and drop.

It is possible to select multiple entries and to move the highlighted area.

To do so, keep the Ctrl key pressed and use the left mouse button to select multiple entries. To select a range, click on the first entry, hold the Shift key and click the last entry with the left button.

Sorting save

save the current sorting.

Explanation on sorting: If 2 production orders start simultaneously and both require the same resources, the first production order receives the free resource first and the second can only be scheduled afterwards. The sequence therefore determines which production order receives the free resources first.

Calculate

Starts the scheduling of all marked work orders.

Calculation

Shows the current calculation type. The orange reference arrow opens the setting APS Calculation types .

View

Current view (default) The orange reference arrow opens the settings of planning view.

Sorting

Select from different sortings. see APS edit planning.

Collective action

Set check mark, to perform the action selected in lower field for all marked work orders.

Delivery date

Select delivery date, with click on the red/black icon the change is applied to all marked work orders.

Start date

Select start date, with click on the red/black icon the change is applied to all marked work orders.

Production type

Select production type, with click on the red/black icon the change is applied to all marked work orders.