In-house production

If a price list was selected, you can specify the price that should be entered in the following field.

This field is visible only if "per warehouse" was not enabled.

Note:

Saving the price list is very time-consuming. If Beas finds a beas-common-Service running, the price list update is moved to that service. Therefore, the Precalculation can be completed faster.

Sub-assemblies are not broken down but calculated as purchase parts; phantom assemblies are broken down.

Depending on the switch "value depending assemblies" (see below) sub-assemblies are always valued first.

Example

The subassembly is valued with the value indicated in "Price list" - "with reference to". If the subassembly was not valued before, the price according to "pricing" is used.

Example

Note:

If you use "One Step", the result can be different than when the option is disabled.

Reason: if you work with one step, the system calculates the sub-assembly with all costs from the calculation schema. The main item uses this result in its Bill of materials and adds the costs of calculation schema at the end again.

If disabled, the system calculates the complete structure and adds costs from the calculation schema once.

Note:

If purchase parts are included in the batch run, the calculated price of the purchase parts is used as reference for material valuation when calculating the assemblies.

Field: onelevel (1=on, 0=off - Standard)

Filter: All items from A-B
Item A is calculated, which includes items B and C

If the switch is active, items  B and C are valued before.
If the switch is not active, only item B is valued. For item C the price according to pricing is used.

Note: Variants are not checked!

 
Example:
subassembly B1 variant "A", B2 for variant "B"
Both sub-assemblies are calculated, even if only one of the sub-assemblies is included in the calculation of the superordinate assembly.