(<<) StartCalcRoutingPositionBackward
Contents
Executed while capacity calculation for every routing position after calculation of this position and after creating the time reservation table
Only Backward Calculation
The Time line is end of idle time
Variable |
Read |
Write |
Description |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
e_Method |
x |
Calculation Method MRP Executed by MRP, ATP, CTP Workorder Executed manually from work order Or the Calculation Method, which defined in APS List |
|||||||||||||
e_MethodStep |
x |
In Method you can define more then one Step. This is the Step. First step is 1 |
|||||||||||||
e_DocEntry |
x |
Work order document number |
|||||||||||||
e_LineNumber |
x |
Work order position number |
|||||||||||||
e_LineNumber2 |
x |
Routing Position |
|||||||||||||
e_BaseDocEntry |
x |
Base document, example Sales order. Only in MRP |
|||||||||||||
e_BaseLineNumber |
x |
Base document line |
|||||||||||||
e_ItemCode |
x |
Calculated Item Code |
|||||||||||||
e_Quantity |
x |
Calculated Quantity |
|||||||||||||
e_CheckReservedTime |
x |
Check reserved times |
|||||||||||||
e_RoutingSplitt |
x |
Allow Routing Split true/false |
|||||||||||||
e_Simulation |
x |
Simulation true/false |
|||||||||||||
e_CalcSaveType |
x |
Save type
|
|||||||||||||
e_ReservationType |
x |
||||||||||||||
e_Resource |
x |
x |
Resource Id If you change resource, the system make only the time reservation on this resource, but don't change the resource on routing position |
||||||||||||
e_TimeLine |
x |
x |
Time line in format yyyy/mm/dd hh:mm Backward: The End Date Forward: The Start Date
Note: The time line is between transit and idle time in forward calculation you can go only forward in time line in backward calculation you can go only backward
|
||||||||||||
e_Duration |
x |
x |
Duration in minutes |
Every Date must have follow format: yyyy/mm/dd hh:mm
If you use another format, then the system don't save the value in correct way.
NOTE:
The system don't check the changes. If you change any parameter, you must check all / calculate other parameters too.
The system save the changes in Work order routing position, but this don't have effect to time reservation table BEAS_RESOURCEN!